5 Inch For 800x480 HDMI Signal Tft Display With Capacitive Touch Screen
General Description:
This product is a universal 5" HDMI display with 800 x 480 resolution with capacitive touch panel. It supports Raspberry Pi and can also be used as a computer monitor.Touch Screen LCD Compatible with Raspberry Pi 4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4 1024×600 Resolution HDMI IPS Low Power Consumption Supports Windows.
Specifications:
| Parameter | Symbol | Min | Max | Unit |
| Power for Circuit Driving | VCC | -0.3 | 5.5 | V |
| Power for Circuit Logic | IOVCC | -0.3 | 3.3 | V |
| Input voltage | Vin | -0.3 | VCC + 0.3 | V |
| Operating temperature | Top | -20 | 70 | ℃ |
| Storage temperature | Tst | -30 | 80 | ℃ |
| Humidity | RH | / | 90%(Max60C) | RH |
Ctp Characteristics:
| Item | Contents | Unit |
| Panel Type | Glass Cover + Glass Sensor | --- |
| Resolution | 800 X 480 | Pixel |
| Surface Hardness | 6H | --- |
| Transparency | ≥86% | mm |
| Driver IC | TBD | --- |
| Interface Type | USB Interface | --- |
| Support Points | 5 | --- |
| Sampling Rate | 20~100 | Hz |
| Supply voltage | 3.3V | V |
Connection Examples:
Working With Raspberry Pi 4
Working With Raspberry Pi-3B+
Working With Raspberry Pi Zero W
Working With Mini PC
Attention:
1) This LCD can support Raspberry Pi OS / Ubuntu / Kali / Retropie systems. When the LCD works on systems such as Raspberry Pi OS, the resolution must be set manually, otherwise, it will cause an abnormal display.
2) On December 2, 2021, the Raspberry Pi OS was divided into two branches, the Buster branch, and the Bullseye branch. The Buster branch is a continuation of the old system and is more stable. The Bullseye branch added some new features, using open source libraries and new interfaces. Since the current Bullseye branch has just been released shortly, it is not stable yet. If you are an industrial user, it is strongly recommended to use the Buster branch.
3) If you use the Buster branch system, you can use it according to the above configuration. But if you are using the Bullseye branch system, you need to modify the default KMS driver to FKMS driver for displaying the system desktop normally.
Product Tags:
|
|
Capacitive Touch Screen HDMI Signal Tft LCD Display 5 Inch 800x480 Images
|
